What is Osmo polyx oil

Osmo Polyx Oil is the original hard wax oil a combination of natural oils and waxes for use on almost any interior project. Hard Wax Oil is almost as hard as a varnish but easier to repair. All you need is a rag apply the oil over the affected areas without having to remove any previous finish.

What is the difference between Osmo polyx and top oil?

Osmo makes three variations of Polyx-Oil, the original Polyx-Oil, Top Oil and Polyx Pro Oil. All three are very similar, with the only significant difference being the amount of solvent. Top Oil contains more solvent, and is supposedly optimized for furniture and countertops (as opposed to floors).

Is Osmo polyx oil polyurethane?

Osmo hardwax oil is a hard wearing, clear finish for timber and cork flooring. It gives the timber the perfect coverage an protection without crating a film on the surface. … It is the natural alternative to polyurethane.

Is Osmo polyx oil good?

Very good finish, not too glossy and still looks and feels like wood. But, its fully water resistant and also hard enough to stand small knocks. Just lightly sanded and recoated after three years and look almost like new again. Expensive but probably the best and worth it if you like wood like me.

How long does Osmo polyx take to dry?

Osmo Polyx®-Oil 2K (6125) has a special curing time of 4 hours, which means the floor can be used as normal after this time.

Can you polish Osmo polyx?

Leave to dry 8-10 hours, ventilate well. When thoroughly dry, surface can be buffed or polished with hand polisher or buffing machine.

Should you sand between coats of Osmo?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat.

Does Osmo polyx oil darken wood?

A clear oil such as Osmo Polyx Oil will maintain the natural appearance, but will darken the wood again, much like when you wipe water over bare wood, it will enhance and enrich the woods natural tones.

Can you thin Osmo polyx oil?

A litre of Osmo Polyx Oil will cover about 24 square metres per coating. Calculate the area that you need to finish using this guide – it is not advisable to dilute this product. Using too much will delay drying and may result in performance and aesthetic problems that are hard to resolve.

Is Osmo polyx waterproof?

OSMO Polyx-Oil 2K Features: Once cured it’s highly water resistant. It is very environmentally friendly with low VOC’s (Volatile Organic Compounds) Doesn’t stink up and drive you out of your home like some finishes will.

Article first time published on

Is Osmo polyx oil a varnish?

Osmo Polyx Oil is the original hard wax oil a combination of natural oils and waxes for use on almost any interior project. Hard Wax Oil is almost as hard as a varnish but easier to repair. All you need is a rag apply the oil over the affected areas without having to remove any previous finish.

How many coats of Osmo do I need?

For roller or brush applications; a maximum of two coats is recommended. Our finishes are designed to penetrate into the wood, application of a third coat is unlikely to absorb. For cloth applications; three or four coats is recommended.

How do I speed up Osmo drying time?

Allowing for extra ventilation into the room will allow as much air flow as possible. Only natural air can help the drying process.

How often should you apply Osmo oil?

For high traffic areas in restaurants and shops, Osmo Maintenance Oil should be used every other month or more depending on the amount of use. The protective surface can be renewed when the floor starts to show signs of wear. This can be done at any time without needing to sand the old finish.

Can you apply Osmo oil with a cloth?

Cloth Application Apply thinly with a clean lint-free cloth onto a clean, dry and smooth surface. Work it in slight circular motions along the grain. Once you’ve wiped on a thin layer, use a dry cloth and wipe off in the direction of the grain to avoid streaks.

Can you use Osmo polyx oil on kitchen worktops?

Osmo Polyx Oil is resistant to water, dirt, wine, coffee etc and is microporous, so will not crack, peel or blister. A better option could be Osmo Top Oil that is specifically formulated for kitchen worktops and is available in a range of finish types including clear matt and satin, natural, white, acacia and more.

Is Osmo a drying oil?

Osmo Polyx®-Oil 2K (6125) has a special curing time of 4 hours, which means the floor can be used as normal after this time. However, the other Polyx®-Oils have a drying time of 8-12 hours and a full curing time of approx.

Is Osmo polyx oil toxic?

In the spirit of how we harvest and use the wood, we want our finish to be easy to use, durable, non-toxic, and easy on the environment. Osmo Polyx-Oil is all those things. Made from natural vegetable oils and waxes, it does not off-gas or smell bad. It’s durable, easy to apply, and easy to repair.

Can you put Osmo over stain?

It worked fine, just make sure that the stain is well dried before applying the osmo. 2 of 2 found this helpful.

Can you use Osmo polyx oil outside?

Quick drying version of Osmo Polyx oil used to complete projects that require a quick turnaround. An oil and wax based biocide-free wood preservative for interior and exterior use and ideal for high moisture environments.

Can you brush on Osmo oil?

With no need for thinning (Osmo Polyx Oil is supplied ready to use) all you need to do is stir the pot well and you can begin application. Apply the oil with a firm and fine bristle brush, dip it into the paint being careful not to overfill it and then brush it evenly along the wood grain.

What does Denibbing mean?

Denibbing is the removal of “nibs” and imperfections from your finish, and it should be performed between each coat of any finish applied. Denibbing Varnishes, Paints and Surface Finishes.

Can I wax over Osmo?

Wax on Oil is possible, if the oil is dry, as the wax can be buffed to a shine. It would be best with Sand and Oil only, but check with the application instruction and experiment in a small out of sight area.

What is polyx oil made of?

Key ingredients in Polyx Oil include sunflower, soybean and thistle oil, plus two hard, natural waxes—carnauba and candelilla. A Brazilian palm tree, Copernica cerifera, produces the carnauba in its leaves, berries and stalks. Villagers cut down fronds, dry them for several days, and then beat off the wax.

Does Osmo oil need 2 coats?

OSMO Hardwax Oil requires two coats. The second coat should be applied after the first coat is thoroughly dry. … coat until the surface is evenly dull.